fastshipping Portable 25m electronic Anti-lost Stolen alarm deviceElectronic Anti-lost devices

Features:
Green environmental protection, no radiation
Beautifully compact and easy to carry, the use of object-Canton
Freedom from regulation, the use of flexible
256 group codes, the protection of property
Lost looking for the independence of strong anti-free choice

Method of application

Guard against losr: Dial the regulation and control button of the receiver to maximum reception range, dial the power switch to "anti-lost N-ON", the cue tone "tick" of staring up will be sent out, subsequently the receive will send out the cue tone "tick...tick..." of waiting studying, now dial the sender supply switch to ON, and then the signal light of the sender will flicker and proceed to send signal, after the receiver receives signals from the sender, it will send out two cue tonse "tick...tick..." to indicate successful study, and the signal light flickers to indicate successful studying of code.Note: If the receiver boots and sends out cue tones "tick...tick..." to indicate successful study (while now the sender exists in closedown state), please check whether there is any other sender in use. Afer the sender starts up, if the receiver still sends, out the cue tone "tick...tick..." of waiting for the study,in this case it  indicates the receiver hasn`t receive signals from the sender. Please check whether you dial the regulation and control button to correet direction, whether the sender is in normal operation!

After successful study of the code, push the regulation and control button of distance to set the desirable distance of the protected object, generally the distance of articles such as luggage and wallets is set about 3meters, the distance of kids or pets is relatively farthe, please set according to your own desire.

When the protected object walk out of the setting distance, the receiver alarms with one warning cue tone of the product, products with vibrating mark will vibrate as well sa alarms)Searching function Dial power switch to "search S-ON", then the signals from sender, it sends out the cue tones :tick..."to iindicate approaching and vibrates (products with vibration function),the receiver signal light will be on but no warning tone.The sender should be put on the protected object, the receiver should be carried with yourself or the host.